Page 139 - คู่มือการถ่ายทอดองค์ความรู้ของครูภูมิปัญญาท้องถิ่น อำเภอสิงหนคร จังหวัดสงขลา
P. 139

Length
           Day/Month/Year                      Detailed Contents                        (Hours)


                             must all be the same length and should be equally tight so the
                             kite stays balanced. Cut any extra paper off around the edges.

                Day4         Making a Buffalo Kite                                      4 Hours
                                 1. Cutting the bamboo, sections of bamboo stick are
                             used as the cener frame and when cut they are smoothed on
                                          t
                             the surface and pointed at both ends. The bamboo sticks are
                             cut according to the strength of the wind. To fly a kite in strong
                             winds the sticks on the wings should be thick but for light winds,
                             the wings could be thinner.

                                    The bamboo should be crossed and tied in the middle
                             to prevent the upper and lower wings from moving. The end
                             of the sticks should be slightly cut to insert them inside each
                             other then tying them a second time to strengthen the kite.

                                 2. The cross stick should be sharpened into a diamond
                             shape with sticks the same size as for the tail and wings.
                                 3. The Kadohk string is tied from the center of both
                             wings down to the tail. The strings should be the same length,

                             so when the paper is glued on the tail will not interfer
                             with the top.
                                 4. To connect strings to the wings, tie a string from the

                             left to the right wing making it a straight stand. The left and
                             right wing should be the same size so the kite does not just look
                             beautiful but so the wind can circulate well and help the kite glide.
                                 5. To make the buffalo head the bamboo sticks must be

                             thinly sliced, when the stick are ready tie them onto the kite
                             frame making it look like a buffalo bead.
                                 6. To make the buffalo horns use long bamboo sticks
                             with sharpened ends and tie them onto the head piece of the

                             buffalo. Pull both of the sides up to the wings ends making
                             it look like buffalo horns.
                                 7. For making the buffalo head the bamboo sticks should
                             be sliced thin so it is easier to form an oval shape similar to

                             the buffalo ear, then it should be placed onto the lower part
                             of the head.






                                                                dilon1,1hu"W10Ro.il'i,i1-ui3TJ011,i..,,iiu ryry ,i1011iiu
                                                                                    ,J",I
                                                                             011nE>fll>l1UFIS  OIJl1MOUl'll   <.)"1"1
   134   135   136   137   138   139   140   141   142   143   144